NETGEAR RP114 manual Static Route Entry and Edit Menu, Edit IP Static Route Fields

Reference Guide for the Model RP114 Web Safe Router

To add or edit a Static Route, select a number and click the Edit button to open the Edit Menu, shown in Figure 5-4

Figure 5-4. Static Route Entry and Edit Menu

Table 5-5lists and describes the fields for the IP Static Route Edit menu.

Table 5-5.	Edit IP Static Route Fields
Field		Description
Route Name		Enter a descriptive name for this route for identification purposes only.
Active		Use this field to activate or deactivate this static route.
Destination IP Address		Enter the IP network address of the final destination. Routing is always based
		on network number. If you need to specify a route to a single host, use a
		subnet mask of 255.255.255.255 in the subnet mask field to force the
		network number to be identical to the host ID.
IP Subnet Mask		Enter the subnet mask for this destination.
Gateway IP Address		Enter the IP address of the gateway to the destination network. The gateway
		is the next router that your router contacts in order to forward packets to the
		destination. On the LAN, the gateway must be a router on the same segment
		as the router. Over the WAN, the gateway will be the IP address of the router
		at your ISP.

Advanced Configuration of the Router 5-9