Reference Guide for the Model RP114 Web Safe Router
10-8 Configuring Filters
TCPEstab Thisfield is dependent upon the IP Protocol field. This field is inactive (N/A) unless the
valuein that field is 6 (TCP protocol). Determine what type of TCP packets to filter,from
thefollowing two options:
• Yes—Filter match only establishedTCP connections
• No—Filter match both initial and established TCP connections (Default)
More Determineif you want to pass the packet through the next filter rule before an action is
taken.Two options are available for this field:
•Yes
• No (default)
If Moreis Yes, then Action Matched and Action Not Matchedis N/A.
Log Determineif you want to log the results of packets attempting to pass the filterrule.
Theseresults are displayed on the System Log (see View Error Log”onpage9-4).
Sevenoptions are available for this field:
• None—No packets are logged (default).
• Action Matched—Only packets that match the rule parameters are logged.
• Action Not Matched—Only packets that do not match the ruleparameters are logged.
Both—Allpackets are logged.
• Check Next Rule (default)
•Forward
•Drop
ActionMatched
ActionNot
Matched
If theconditions for the filter rule are not met, you can specify what to do withthe
packet.There are three options for this field:
• Check Next Rule (default)
•Forward
•Drop
Table10-4. TCP/IP Filter Rule Fields (continued)
Field Descriptions