Reference Guide for the Model RP114 Web Safe Router
7-2 Using the Manager Interface for Initial Router Configuration
OR
Add a route to the static routingtable of the workstation to indicate that the router can be
reachedthrough the local LAN port.
Toaccess the router by Telnet from a Windows PC:
1. From theWindows toolbar, select Start.
2. SelectRun...
3. In the Openfield, type:
telnet 192.168.0.1
4. Click on OK.
Therouter should respond with a “Password:” prompt. Type the current passwordto access the
Manager interface.The default password is 1234.
.When using Telnet,consider the following restrictions:
Single administrator
Toprevent confusion and discrepancy on the configuration, the routerallows only one Telnet
connectionat any time.
Systemtimeout
When you are connectedto the router through Telnet, there is a system timeout of 5 minutes
(300 seconds).If you are not configuring the device and leave it inactive for this timeout
period,the router automatically disconnects from the Telnet session.An exception is made for
Menu 24.1, which displayscurrent status and statistics. This menu will not time out.