Reference Guide for the Model RP114 Web Safe Router
3-6 Preparing Your Network
2. From the“Connect via” box, select your Macintosh’s Ethernet interface.
3. From the “Configure”box, select Using DHCP Server.
Youcan leave the DHCP Client ID box empty.
4. Close the TCP/IP ControlPanel.
5. Repeat thisfor each Macintosh on your network.
VerifyingTCP/IP Properties (Macintosh)After yourMacintosh is configured and has rebooted, you can check the TCP/IP configuration by
returning to the TCP/IP Control Panel. From the Appl em enu, select Control Panels, then TCP/IP.
The panel is updatedto show your settings, which should match the values below if you are using
the default TCP/IP settings that NETGEAR r ecommends:
• The IP Addressis between 192.168.0.2 and 192.168.0.31
• The Subnet mask is 255.255.255.0
• The Routeraddress is 192.168.0.1
If you donot see these values, you may need to restart your Macintosh or you may need to switch
the “Configure”setting to a different option, then back again to “Using DHCP Server”.