NETGEAR RP114 manual This screen shows the following parameters, Menu 3.2 System Status Fields

Reference Guide for the Model RP114 Web Safe Router

This screen shows the following parameters:

Table 6-1.	Menu 3.2 - System Status Fields
Field		Description
System Name		This field displays the Host Name assigned to the router.
Router Firmware Version		This field displays the router firmware version.
WAN Port		These parameters apply to the Internet (WAN) port of the router.
IP Address		This field displays the IP address being used by the Internet (WAN) port
		of the router. If no address is shown, the router cannot connect to the
		Internet.
IP Subnet Mask		This field displays the IP Subnet Mask being used by the Internet (WAN)
		port of the router.
DHCP		If set to None, the router is configured to use a fixed IP address on the
		WAN.
		If set to Client, the router is configured to obtain an IP address
		dynamically from the ISP.
LAN Port		These parameters apply to the Local (WAN) port of the router.
IP Address		This field displays the IP address being used by the Local (LAN) port of
		the router. The default is 192.168.0.1
IP Subnet Mask		This field displays the IP Subnet Mask being used by the Local (LAN)
		port of the router. The default is 255.255.255.0
DHCP		If set to None, the router will not assign IP addresses to local PCs on the
		LAN.
		If set to Server, the router is configured to assign IP addresses to local
		PCs on the LAN.

6-2 Maintenance