Reference Guide for the Model RP114 Web Safe Router

In this case you must define a static route, telling your router that 134.177.0.0 should be accessed through the ISDN router at 192.168.100. The static route would look like Figure 5-5.

Figure 5-5. Static Route Example

In this example:

The Destination IP Address and IP Subnet Mask fields specify that this static route applies to all 134.177.x.x addresses.

The Gateway IP Address fields specifies that all traffic for these addresses should be forwarded to the ISDN router at 192.168.0.100.

A Metric value of either 1 or 2 will work.

Private is selected only as a precautionary security measure in case RIP is activated.

Advanced Configuration of the Router

5-11

Page 65
Image 65
NETGEAR RP114 manual Static Route Example