Reference Guide for the Model RP114 Web Safe Router

The Router’s Front Panel

The front panel of the Model RP114 Web Safe Router (Figure 2-1) contains port connections and status LEDs.

Figure 2-1. RP114 Front Panel

You can use some of the LEDs to verify connections. Table 2-1lists and describes each LED on the front panel of the router. These LEDs are green when lit.

Table 2-1.

LED Descriptions

 

 

 

 

 

 

Label

 

Activity

 

Description

 

 

 

 

 

PWR (Power)

 

On

 

Power is supplied to the router.

 

 

Off

 

Power is not supplied to the router.

 

 

 

 

 

TEST

 

On

 

The system is not ready or has failed to start up.

 

 

Off

 

The system is ready and running.

 

 

Blinking

 

The system is initializing.

 

 

 

 

 

WAN

 

 

 

 

LNK

 

On

 

The WAN port has detected a link with an attached device.

ACT (Activity)

 

Blinking

 

Data is being transmitted or received by the WAN port.

 

 

 

 

 

LAN

 

 

 

 

LNK/ACT

 

On

 

The LAN port has detected a link with an attached device.

(Link/Activity)

 

Blinking

 

Data is being tranmitted or received by the LAN port.

100 (100 Mbps)

On

 

The LAN is operating at 100 Mbps.

 

 

Off

 

The LAN is operating at 10 Mbps.

 

 

 

 

 

Setting Up the Hardware

2-3

Page 27
Image 27
NETGEAR RP114 manual Router’s Front Panel, LED Descriptions