NETGEAR RP114 manual Menu 11.5 Remote Node Filters, Remote Node Filters Fields

Reference Guide for the Model RP114 Web Safe Router

After defining filters in Menu 21, apply the filters to the Remote Node by entering the filter number in Menu 11.5 - Remote Node Filters. You can cascade up to four filter sets by entering the numbers of the desired filter sets, separated by commas and with no spaces between them.

Menu 11.5 - Remote Node Filters is shown in Figure 8-5.

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= 3

device filters= Output Filter Sets: protocol filters= device filters=

Call Filter Sets: protocol filters= 1

device filters=

Press ENTER to Confirm or ESC to Cancel:

Figure 8-5. Menu 11.5 - Remote Node Filters

Table 8-3describes the fields of the Remote Node Filters display.

Table 8-3.	Remote Node Filters Fields
Field		Description
Input, Output, and		These categories allow the application of filters to incoming data or outgoing data,
Call Filters		and they cause or prevent the placement of outgoing calls.

Protocol Filters

Enter the filter numbers of IP packet format filters defined in Menu 21.

Device Filters

Enter the filter numbers of generic packet format filters defined in Menu 21.

For more information on using filters, refer to Chapter 10, “Configuring Filters .”

Using the Manager Interface to Configure the Router for Internet Access 8-9