Nortel Networks 3395A manual Syntax

CONNECT

Syntax
	CONNECT		[domain-name[:telnet-port-number]]
			[internet-address[:telnet-port-number]]
			[[SERVICE] service-name] [NODE node-name]
			[DESTINATION port-name]
Abbreviation
	C	[SERV]	[NOD] [DEST]
Where	Means
domain-name	Establish a session with the Telnet host you specify in this variable. A domain name
	may contain up to four segments, separated by a period.
internet-	Establish a session with the destination at the Internet address you specify
address	in this variable. An Internet address consists of four numbers, separated by a period.
:telnet-port-	Establish a session using the number of an Internet protocol or the port
number	number you specify in this variable. Precede the port number with a colon (:) to
	separate it from the domain name or the Internet address. Valid port numbers are the
	whole numbers 1 through 32767.
service-name	Establish a session with the LAT service you specify in this variable. A service name
	can consist of 1 through 16 characters.
NODE	Establish a session with the LAT server at the node you specify in the node-name
	variable. Use this keyword when the LAT service you in the service-namevariable is
	offered at more than one node, and you want to specify the node.
node-name	Establish a session with the LAT service at the node you specify in this variable. A
	node name can consist of 1 through 16 ASCII characters.
DESTINATION	Establish a session with the LAT service at the remote port you specify in the variable.
	Use this keyword when the LAT service you specified in the service-namevariable is
	offered at a port on another terminal server, and you want to specify that port.
port-name	Establish a session with the LAT service at the port you specify in this variable. A
	port name can consist of 1 through 16 ASCII characters. The default name for a port
	on a Model 3395/3395A Terminal Server has the form PORT_x, where x is the
	number of the physical terminal server port (1 through 16).

3-6 893-386-B