Nortel Networks 3395A manual Ppp

SHOWLIST PORT

Characteristic		Means
DSRlogout		The terminal server logs out the port when the serial interface
		DCD signal is deasserted.
DSRWait		The terminal server begins the login sequence at this port
		when the DSR signal is asserted.
Inactivity Logout		The terminal server logs out the port after the period of time if
		you have not entered any commands at the port. The network
		manager specifies the amount of time with the SERVER
		INACTIVITY TIMER value.
Input Flow Control		This port uses flow control to regulate the flow of data from
		the device connected to it.
Internet Connections		The port can accept Internet addresses as well as domain names
		in connect commands.
Interrupts		You can use the <Break> key or a local switch character to
		interrupt a session at a remote terminal server.
Kerberos		The Kerberos security system is enabled at this port.
Limited View		You cannot view destinations on the network with the
		SHOWLIST DESTINATIONS, NODES, or SERVICES
		commands.
Line Editor		You can use editing characters at this port.
Loss Notification		The terminal “beeps” if you enter a command line that exceeds
		132 characters.
Message Codes		The port displays the number associated with status or error
		messages.
Menu	This port uses a menu-driven interface.
Multisessions		This port uses multisessions.
Noloss		This port stores data in a buffer while waiting for a session to
		be established, then sends the data to the connections partner
		when the session is established.
Output Flow Control		This port uses flow control to regulate the flow of data to the
		device connected to it.
Password		You must enter a password to log on to this port.
Pause		This port pauses when it sends data from display commands to
		the terminal after it fills each screen.
PPP		The Point-to-Point Protocol is enabled at this port.
Privileged Menu		The port is privileged and uses the menu interface. (Not
		visible to Secure users.)

3-50 893-386-B