
SET PORT
Examples
None of these examples specify a port number since the commands apply to the issuing port.
1 . This command to assigns a backward switch character.
In this example, a user sets the backward switch character to <Ctrl><K>. (When you press the <Ctrl> key at the TS3395> prompt, the terminal displays the ^ character.)
TS3395> set port backward switch ^p
TS3395>
2 . This command enables the pause feature.
TS3395> set port pause enabled
TS3395>
3 . This command changes the RESOLVE SERVICE characteristic. A user sets the RESOLVE SERVICE characteristic to LAT. This causes the terminal server to interpret LAN destinations in CONNECT commands from this port as LAT services.
TS3395> set port resolve service lat
TS3395>