Nortel Networks BCM50 2.0 To perform an immediate backup to a network folder

278 Chapter 11 Backing Up and Restoring BCM50 Data
NN40020-600NN40020-600
Performing an immediate backup to a network folder
To perform an immediate backup to a network folder
1In the task panel, click the Administration tab.
2Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3In the Backup To selection field, select Network Folder.
4Configure the Network Folder attributes.
5Click the Backup button.
The Backup window opens
6In the Optional Components table, select or clear the check box for each component to
include or exclude these components from the backup operation.
7Click the OK button.
A warning window opens. Read the warning carefully before proceeding.
8Click the Ye s button to proceed.
A progress window opens. When the backup preparation is complete, the Backup Complete
message displays.
9Click the OK button.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.
Table 73 Configure Network Folder attributes
Attribute Action
Network Folder Enter the hostname or IP address of the network folder and the resource
name. For example, enter \\<server>\<resource>.
User Name Enter the user name associated with the network folder.
Password Enter the password associated with the network folder.
Directory Enter the path to the subdirectory (optional).