Nortel Networks BCM50 2.0 Creating a group, To create a group, Deleting a group, To delete a group, Modifying group privileges

94 Chapter 4 BCM50 Security Policies and Accounts and Privileges
NN40020-600NN40020-600
3Enter a new password that conforms with the system password policies, which are defined by
the administrator during system setup.
A confirmation dialog box appears.
4In the confirmation dialog box, enter the new password again.
5Click OK.
The password takes effect the next time you log in.
Creating a group
As an administrator, you can create new groups to satisfy organizational requirements.
To create a group
1Select Configuration, Administrator Access, Accounts and Privileges, View by Groups
tab.
2Click the Add button.
3In the Add Group dialog box, enter a name for the new group.
4Click OK.
5Select the new group from the Groups list.
6In the Group Privileges area, click the Add button.
7In the Add Privilege to Group dialog box, select one or more group privileges to assign to the
group and click OK. See “Default groups” on page 99 and “Default access privileges
excluding set-based privileges” on page 101 for more information.
8Populate the group using “Adding a user account to a group” on page 95.
Deleting a group
As an administrator, you can delete groups as organizational requirements change.
To delete a group
1Select Configuration, Administrator Access, Accounts and Privileges, View by Groups
tab.
2Select a group and click the Delete button.
3Click Yes on the confirmation box to remove the groups from the list.
Modifying group privileges
Only user-created groups can be modified; default group privileges cannot be modified.