Chapter 11 Backing Up and Restoring BCM50 Data 289
BCM50 Administration Guide
10 Click the OK button.
The scheduled backup is displayed in the Scheduled Backups table.
Modifying and deleting scheduled backups
You can modify existing scheduled backups. You can modify:
• the memo for the scheduled backup
• optional components to include in the backup
• schedule details for the backup
You can also delete a scheduled backup.
Modifying a scheduled backup
To modify a scheduled backup
1In the task panel, click the Administration tab.
2Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3Click the Scheduled Backups tab.
The Scheduled Backups panel opens.
4Select a scheduled backup in the Scheduled Backups table.
5Click the Modify button.
The Modify Scheduled Backup window opens.
6Modify the attributes of the scheduled backup as required. For information about how to
configure the attributes, see the procedures in “Viewing and performing scheduled backups”
on page 281.
Day of Month Select the day of the month on which the scheduled backup is to occur.
Time Select the time at which the scheduled backup is to occur.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.
Table 84 Configure schedule attributes
Attribute Action