54 Chapter 3 BCM50 Management Environment
NN40020-600NN40020-600
Use the following steps to copy data within a table:
1Select the row from table that you want to copy by clicking on it.
2Press the Copy button
3Select the row or rows to which you want to paste the information.
You can select multiple rows to paste data in by pressing either the Shift or Ctrl key.
4Press the Paste button
Either the Paste Set Data or the Paste Line Data dialog box appears dependin g on whether you
are copying data within the Sets or Lines task tree items. The check boxes within these dialog
boxes change depending on th e data selected to copy. Table 7 shows the possible check boxes
that can appear and what type of data will be copied when they are selected
5Check the check boxes for the types of data that you would like to copy to the selected rows.
6Select OK to paste the information.
The rows are updat ed with co pie d data .
Table 7 Paste Data
Check box title Settings copied Settings not copied
Control set (Lines, Sets) • Control set from the copied
source into the selected
row
Restrictions (Lines, Sets) • Set restrictions
•Set lock
• Allow Last Number Redial
• Allow Saved Number
Redial
• Allow Link
• Line/set restrictions
• Direct-dial set designation
(which set is the D-Dial set)
• CAP/TAP assignment
• ExtraDial set designation
• Service mode ringing set
designation
• Prime set designation for a
line
• Hunt group appearance
Trunk Data (Lines, Sets) • Data in common between
the copied and pasted
trunks.
• Data can be copied
between two different trunk
cartridge types
Telco data (Lines, Sets) • Call Log set (Logging set)
• 1stDisplay
• Log password
•Log space
Buttons (Sets) • All programmable set
buttons from the copied set
into the selected row’s
programmable buttons.
Line access (Sets) • Line assignment
• Line pool access
• Prime line designation
• Number of intercom keys
• Answer DNs (unless
Answer button DN is same
as telephone to which is
being copied)
• Private line appearances