Nortel Networks BCM50 2.0 To perform a scheduled backup to an FTP server

286 Chapter 11 Backing Up and Restoring BCM50 Data
NN40020-600NN40020-600
8Configure the schedule attributes.
9Click the OK button.
The scheduled backup is displayed in the Scheduled Backups table.
Performing a scheduled backup to an FTP server
To perform a scheduled backup to an FTP server
1In the task panel, click the Administration tab.
2Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3Click the Scheduled Backups tab.
The Scheduled Backups panel opens.
4Click the Add button.
The Add Scheduled Backup window opens.
5In the Backup To selection field, select FTP Server.
Table 80 Configure schedule attributes
Attribute Action
Memo Enter a note for the scheduled backup, as applicable.
Recurrence Select how often the scheduled backup is to occur. Options are: Once,
Daily, Weekly, Monthly. Depending on the option you choose, the window
displays selections for the month and day of month. If you select Weekly,
days of the week are displayed. Select the check box for Daily to select the
day.
Month Select the month in which the scheduled backup is to occur.
Day of Month Select the day of the month on which the scheduled backup is to occur.
Time Select the time at which the scheduled backup is to occur.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.