Nortel Networks BCM50 2.0 To perform an immediate backup to a USB storage device, To p

Chapter 11 Backing Up and Restoring BCM50 Data 279
BCM50 Administration Guide
Performing an immediate backup to a USB storage device
To perform an immediate backup to a USB storage device
1In the task panel, click the Administration tab.
2Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3In the Backup To selection field, select USB Storage Device.
4Click the Backup button.
The Backup window opens.
5In the Optional Components table, select or clear the check box for each component to
include or exclude these components from the backup operation.
6Click the OK button.
A warning window opens. Read the warning carefully before proceeding.
7Click the Ye s button to proceed.
A progress window opens. When the backup is complete, the Backup Complete message
displays.
8Click the OK button.
Performing an immediate backup to an FTP server
To perform an immediate backup to an FTP server
1In the task panel, click the Administration tab.
2Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3In the Backup To selection field, select FTP Server.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.