Operating Instructions
Setting | Description |
|
|
Camera Address | Enter the IP address (or domain name) (Up to 256 |
| alphanumeric characters). |
| • Enter the alphanumeric characters. |
| • An IPv6 address is divided in to 8 groups of hexadecimal |
| digits divided by “:” (colon). |
| Consecutive groups of “0” can all be shortened to “::”. |
| Surround an IPv6 address with square brackets [ ] to |
| distinguish it from an IPv4 address. |
| Example: [201:2:3:4::5] |
| • If the camera supports SSL, enter https:// followed by the IP |
| address to create an SSL connection. When connecting the |
| camera through https, set HTTPS setting of the camera to |
| [Use HTTPS]. |
|
|
Port | Enter the port number. (1 to 65535 numeric characters.) |
| • You must enter the port number. The default is 80. |
|
|
User Name/ | If the camera has security settings enabled (authentication |
Password | setting), enter the administrator user name and password for |
| the camera. |
| • Enter the alphanumeric characters. |
| • 4 to 15 characters. |
| • If you set a general or unregistered user name and |
| password, this software may not work properly. |
| • Password is saved in encryption. |
|
|
Use a proxy server | This option is enabled if you selected [Use a proxy server] in |
| the proxy server settings. (See page 17). |
| If the camera uses a proxy server, configure the proxy server |
| settings and select [Use a proxy server]. |
| Cameras that are registered using an IPv6 address cannot be |
| used with a proxy server. |
|
|
22