Operating Instructions
Icon of Toolbar and Slide Window
Close the operation window.
Move the focus to the previous camera. (Enable if there is a previous camera and disable if there is not a previous camera).
Move the focus to the next camera. (Enable if there is a next camera and disable if there is not a next camera).
Displays the number of the current page, and the total number of pages. Move to a specific page by entering the page number.
Display the previous page. (Enable if there is a previous page, disable if there is not a previous page.)
Display the next page. (Enable if there is a next page, disable if there is not a next page.)
Start manual recording of the selected camera.
Start manual motion detection recording of the selected camera.
Start manual alarm recording (alarm recording of all, alarm 1 /sensor, alarm 2) of the selected camera.
Stop manual recording of the selected camera.
Display the
Display the
Display the
Display the recorded images page.
Display the settings page.
Select all displayed cameras. (When you change pages, the selected will be cleared.)
Clear the selection from all cameras.
Change the display to full screen mode.
Change the display to window mode.
Display/Hide the camera operation bar.
Take snapshots from the focus camera.
Transmit audio to cameras that support audio features (see page 117).
Set the volume of the selected camera (see page 83).
Operate remote access (see page 105). Reconnect to the server (see page 110).
Note
If you drag the toolbar right or left, icons displayed on the toolbar will be changed.
Drag to right.
48
