Panasonic BB-HNP15A Message Cause and Remedy Recording Capacity Limit, Motion Detection/Alarm

		Operating Instructions
Message		Cause and Remedy
Recording Capacity Limit
Enter a number in one-byte		→ Follow the instruction message.
character in "Recording Capacity
Limit".
Enter "Recording Capacity Limit".	•	The Recording Capacity space was blank.
		→ Follow the instruction message.
"Recording Capacity Limit" should	•	A number not between 100 and 500000 was
be between 100 and 500000.		entered in the Recording Capacity blank.
		→ Follow the instruction message.
Set "Recording Capacity Limit" in	•	Recording Capacity for individual cameras is
the range of XXX MB to XXX MB		larger than (Drive capacity - Guaranteed
(Drive capacity - Guaranteed		Destination Hard Disk Space).
Destination Hard Disk Space).		→ Follow the instruction message.
“Limit the destination recording	• [Limit the destination recording capacity] and
capacity” is set on the preferences		[Limit the recording capacity] cannot be used
page. Do you want to disable this		simultaneously.
setting and enable the "Limit the		→ Follow the instruction message.
recording capacity" setting for
each camera?
Motion Detection/Alarm
The MPEG-4 format does not	•	If using the MPEG-4 format, the motion
support motion detection		detection recording is not available.
recording. Do you want to change		→ Follow the instruction message.
the format to JPEG?
The MPEG-4 format does not	•	If using the MPEG-4 format, the recording
support alarm/sensor recording.		frequency setting, alarm/sensor recording are
Do you want to change the format		not available.
to JPEG?		→ Follow the instruction message.
The recording frequency on the		→ Follow the instruction message.
image setting is specified. Set
"Before detected" and "After
detected" setting longer than the
recording frequency setting.

143