| Operating Instructions |
|
|
Setting | Description |
|
|
Enable/Disable | Enable or disable timers. |
| • Timer recording is available only when a timer is enabled. |
| Disabled timers do not record. |
|
|
Timer Name | Enter a timer name. (Maximum 24 characters.) |
| The timer name is displayed on the timer list page. |
|
|
Timer Schedule | To set a timer, set start time, end time and the day of the week. |
| • Checking [Daily] sets the daily timer recording during the |
| specified time period. |
| • If you set the day of the week, check [Day of the Week |
| Setting] and specify the day or multiple days of the week. |
| If the day of the week is not checked, the timer recording is |
| not set. |
| • To record images for a full day, set the same start and end |
| time. If you specify the same time for both start and end, the |
| end time will be considered to be the next day. |
|
|
Recording Method | Select timer recording, motion detection recording only or |
| alarm detection recording only. |
| • A time period before and after detection can be set for |
| motion and alarm recordings. If you do not set a time period, |
| images are recorded only at the motion is detected or an |
| alarm is detected. |
| • To set [all Alarm and Sensor], [Alarm1/Sensor] or [Alarm2], |
| check [Set the Alarm1/Sensor Recording]/[Set the Alarm2 |
| Recording] on the [Alarm/Sensor] setting window of the |
| individual cameras. |
|
|
Executing | If motion detection recording or alarm detection recording is |
Commands for | chosen for the recording method, you can specify the |
Detection | commands to execute when motion or an alarm is detected. |
|
|
Note
•If you click , during timer recording, timer recording is not canceled. To cancel it, disable the timer.
•If you set time period over midnight, the image is divided into 2 images at midnight.
•If you close the operation window, recording will not stop.
When is displayed in the notification area, the recording software is running (see page 9).
•If the network is disconnected during recording, recording will be paused, but the recording icon (see page 55) will still be displayed. Recording starts again
when the network is reconnected. |
|
• See page 123 for deleting timers. | 61 |
|