Setting the motion detection level

You can set the level at which to start motion detection recording.

Motion detection recording only operates when the JPEG format is selected. If the MPEG-4 format is selected, change the format to JPEG (see page 24).

Motion Detection Page

The cell where motion was detected is displayed in red.

You can monitor the progress of motion detection.

Setting	Description
Non Motion	If you check the box, the motion is not detected during the pan,
Detection Operation	tilt or zoom operation of the camera.
	(If the camera does not support the MPEG-4 format, this is
	grayed out.)
Motion Detection	Set the interval for comparing images.
Analysis Frequency	By increasing the interval, you can better detect slow-moving
	objects, and by decreasing the interval, you can better detect
	fast-moving objects.
Threshold to Start	The image is divided into 100 cells. If the number of cells that
Recording	detect motion exceeds the threshold, recording starts.
	A lower threshold is more sensitive to small amounts of motion.
Cell Sensitivity	Set the sensitivity in a cell.