![](/images/new-backgrounds/1292412/29241225x1.webp)
Operating Instructions
Basic Settings Page
Setting | Description |
|
|
Destination Folder | Specify the destination folder to save recorded images (see |
| page 14). |
|
|
Destination Hard | Set enough capacity as your destination disk to prevent the |
Disk Space | system from getting unstable. (100 MB (Default) to 50,000 MB). |
|
|
Limit the destination | To specify the limit of how much data can be recorded on the |
recording capacity | destination disk, select [Limit the destination recording capacity] |
| and enter a value in [Destination Recording Capacity Limit]. |
| Select [Stop all the recordings] or [Delete old files and keep |
| recording] (by 1 minute) when the capacity is full. |
|
|
Connection method | Set the connection method to use for audio and video when the |
to the camera | camera’s data format is set to JPEG (see page 24). |
| If you monitor and record camera images with audio over the |
| internet, the audio may be interrupted due to the network |
| environment. If this is the case, select [Images and audio are |
| connected separately]. |
| There is a limit to the number of connections to the same camera |
| using this software (including |
| and images are sent using one connection], do not make more |
| than 4 connections to the same camera. If you are making more |
| than 4 connections, select [Images and audio are connected |
| separately]. |
|
|
13