Operating Instructions
2.4.2Manually Recording the Image
This software allows you to manually record images.
Recording is operated with the settings that are configured on the image settings page (see page 23).
1.Select the camera to record from the
•A red frame is displayed around the selected camera.
•To select multiple cameras, click the camera images while holding down the [Ctrl] key. A blue frame is displayed around the selected cameras.
(A red frame is displayed around the focus camera.) See page 74 instructions on selecting cameras.
2.Click 
.
•The focus camera and other selected cameras start recording.
•
is displayed in the
•To stop recording, select a camera to stop and click 
.
•You can select [Start Recording] or [Stop Recording] from the [Recording] on the menu bar.
Note
•See page 15 for the estimated file sizes of recorded images.
•When you want to stop recording, always click 
, or select [Recording]- [Stop Recording]. If you close the operation window, recording will not stop.
When 
is displayed in the notification area, the recording software is running (see page 9).
•If the network is disconnected during recording, recording will be paused, but the recording icon will still be displayed. Recording starts again when the network is reconnected.
56
