Pioneer AVH-P4900D Operating this unit Audio Adjustments, Introduction of audio adjustments

Section

03 Operating this unit

Audio Adjustments

Introduction of audio adjustments

#To return to the previous display, touch BACK.

#To return to the display of each source, touch ESC.

Note

If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.

1

1Audio display

Shows the audio adjustment status.

Important

If the multi-channel processor (DEQ-P8000) is connected to this unit, the audio function will be changed to the multi-channel processor’s audio menu. For details, refer to Introduction of DSP ad- justments on page 58.

1Press A.MENU button to display MENU. MENU appears on the display.

2Touch AUDIO to display the audio func- tion names.

The audio function names are displayed and operable ones are highlighted.

#To go to the next group of function names, touch NEXT.

#To return to the previous group of function names, touch PREV.

#If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is se- lected as the equalizer curve, you can switch to BASS and TREBLE.

#Only when the subwoofer controller setting is FULL, NON FADING will be displayed instead of SUB WOOFER. (Refer to Setting the rear output and subwoofer controller on page 39.)

#When selecting the FM tuner as the source, you cannot switch to SLA.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.

1Touch FAD/BAL on the audio function menu.

# When the rear output setting is SUB. W, BAL will be displayed instead of FAD/BAL. Refer to Setting the rear output and subwoofer controller on page 39.

2Touch aor bto adjust front/rear speaker balance.

Each time you touch aor bit moves the front/rear speaker balance towards the front or the rear.

FRONT:15 to REAR:15 is displayed as the front/rear speaker balance moves from front to rear.

# FR:00 is the proper setting when only two speakers are used.

# When the rear output setting is SUB. W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 39.

3Touch cor dto adjust left/right speak- er balance.

Each time you touch cor dit moves the left/ right speaker balance towards the left or the right.

LEFT:09 to RIGHT:09 is displayed as the left/ right speaker balance moves from left to right.

30 En