1 Touch NEXT on the initial menu.
2 Touch D. ATT to switch the digital at-
tenuator setting.
Touching D. ATT switches the digital attenua-
tor settings in the following order:
HIGHLOW

Switching the sound muting/

attenuation

Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
1 Touch NEXT on the initial menu.
2 Touch TEL to select any of the muting,
attenuation, mixing or off.
Touch TEL until the desired setting appears in
the display.
!MUTE Muting
!ATT 20 Attenuation (ATT 20 has a stron-
ger effect than ATT 10)
!ATT 10 Attenuation
!OFF Turn the sound muting/attenuation
off
Notes
!The sound is muted or attenuated, MUTE or
ATT are displayed and no audio adjustment is
possible.
!Operation returns to normal when the phone
connection or the voice guidance is ended.

Resetting the audio functions

You can reset all audio functions except vo-
lume.
!Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch RESET.
3 Touch RESET.
4 Touch RESET again to reset audio func-
tions.
#To cancel resetting the audio functions, touch
CANCEL.

Setting the illumination switch

You can choose whether to have the illumina-
tion of this unit switch on/off when the ignition
key is turned to the ACC position or the power-
off position.
%Touch ILM SW on the initial menu to
turn the illumination switch on.
Set the illumination switch ON to have the illu-
mination of this unit remain on when the igni-
tion key is turned to the ACC position. Set to
OFF to have the illumination off when the igni-
tion key is turned to the ACC position.
#To turn the illumination switch off, touch
ILM SW again.
Note
Never set the illumination switch on if the vehicle
does not have the ACC position. It may cause bat-
tery leakage.
Operating this unit
En
40
Section
03