Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01 to P12.

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control multi-channel
processor (e.g. DEQ-P8000), which is sold sepa-
rately.
!Some functions may differ depending on the
multi-channel processor connected to this
unit.
1
1DSP display
Shows the DSP function names.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1Setting the speaker setting
2Using the position selector
3Auto TA and EQ (auto-time alignment and auto-
equalizing)
4Adjusting the time alignment
5Adjusting the speaker output levels using a
test tone
6Selecting a cross-over frequency
7Adjusting the speaker output levels
8Adjusting 3-band parametric equalizer
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch DSP to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.
#To go to the next group of function names,
touch NEXT.
Available accessories
En
58
Section
04