2 Touch cto turn rear view camera set-
ting on.
#To turn rear view camera setting off, touch d.
3 Touch band then touch cor dto se-
lect an appropriate setting for polarity.
Each time you touch cor dit switches be-
tween the following polarity:
!BATTERY When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
!GND When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R) position

Setting the automatic open

function

To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1 Touch FLP ST on the setup menu.
2 Touch ato turn the set back on and the
LCD panel slides to the back.
#Touch bto turn the set back off and the LCD
panel slides to the front.
3 Touch cor dto select the display to
open/close automatically or manually.
Touch cto select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Touch dto select AUTO, and the display auto-
matically opens/closes when power to this
unit is turned on.

Setting the clock

Use these instructions to set the clock.
1 Touch CLOCK ADJUST on the setup
menu.
2 Touch OFF to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
#To turn the clock display off, touch ON.
3 Touch cor dto select the segment of
the clock display you wish to set.
Each time you touch cor dit will select one
segment of the clock display:
HourMinute
As you select segments of the clock display
the segment selected will be highlighted.
4 Touch aor bto set the clock.
Each time you touch ait increases the se-
lected hour or minute. Each time you touch b
it decreases the selected hour or minute.
Notes
!You can match the clock to a time signal by
touching JUST.
If the minute is 00 to 29, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
If the minute is 30 to 59, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
!Even when the sources are off, the clock dis-
play appears on the display.
Operating this unit
En
42
Section
03