Using the time alignment, Using the equalizer

Available accessories

!If needed, select speakers and adjust their ‘ab- solute’ output levels. (Refer to Adjusting the speaker output levels on the previous page.)

!To adjust the speaker output levels in this mode is the same as making the speaker out- put levels at SP LEVEL. Both provide the same results.

Using the time alignment

The time alignment lets you adjust the dis- tance between each speaker and the listening position.

1Touch NEXT on the DSP function menu.

2Touch TIME ALIGN.

3Touch any of the following touch panel keys to select the time alignment.

!INIT – Initial time alignment (factory set- ting)

!AUTOTA – Time alignment created by auto TA and EQ. (Refer to Auto TA and EQ (auto- time alignment and auto-equalizing) on page 67.)

!CUSTOM – Adjusted time alignment that you can create for yourself

!OFF – Turn the time alignment off

!ADJUST – Adjust the time alignment as de-

sired

#You cannot select AUTOTA if auto TA and EQ has not been carried out.

#You cannot select ADJUST when neither FRONT-L nor FRONT-R is selected in POSITION.

You can adjust the distance between each speaker and the selected position.

!An adjusted time alignment is memorized in CUSTOM.

1 Touch NEXT on the DSP function menu.

Section

2 Touch TIME ALIGN and then touch

ADJUST.

# You cannot select ADJUST when neither FRONT-L nor FRONT-R is selected in POSITION.

	3 Touch aor bto select the speaker to	Available
	3 Touch aor bto select the speaker to
	be adjusted.
	Each time you touch aor bselects the speak-
	er in the following order:
	FRONT-L (front speaker left)—CENTER (center	accessories
	speaker)—FRONT-R (front speaker right)—	accessories
	speaker)—FRONT-R (front speaker right)—
	REAR-R (rear speaker right)—REAR-L (rear
	speaker left)—SUB WOOFER (subwoofer)
	# You cannot select speakers whose size is set
	at OFF.
	4 Touch cor dto adjust the distance be-
	tween the selected speaker and the listen-
	ing position.
	Each time you touch cor dincreases or de-
	creases the distance. 0.0 to 200.0in. is dis-
	played as the distance is increased or
	decreased.
	5 Touch ESC to return to the playback dis-
	play.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

En 65