Pioneer AVH-P4900D operation manual 04Available accessories, Setting the speaker setting

Section

04Available accessories

!Panorama (PANORAMA) extends the front stereo image to include the surround speakers for an exciting “wraparound” ef- fect.

!Dimension (DIMENSION) allows you to gradually adjust the sound field either to- wards the front or the rear.

!Center Width Control (CENTER WDT) al- lows center-channel sounds to be posi- tioned between the center speaker and the left/right speakers. It improves the left-cen- ter-right stage presentation for both the dri- ver and the front passenger.

1Touch NEXT on the DSP function menu.

2Touch DOLBY PL II.

3Touch MUSIC and then touch ADJUST.

# You can operate ADJUST only when MUSIC has been selected.

4Touch aor bto select PANORAMA (pa- norama).

Each time you touch aor bselects the item in the following order:

PANORAMA (panorama)—DIMENSION (di- mension)—CENTER WDT (center width)

5Touch cto turn the panorama control

on.

# To turn the panorama control off, touch d.

6Touch bto select DIMENSION and then touch cor dto adjust front/surround speaker balance.

Each time you touch cor dit moves the sound towards the front or the surrounds. +3 to –3 is displayed as the front/surround speaker balance moves from front to sur- rounds.

7Touch bto select CENTER WDT and then touch cor dto adjust the center image.

Each time you touch cor dit gradually spreads the center channel sound into the front left and right speakers over a range 0 to

3is the default and it’s recommended for most recordings. 0 places all center sound in the center speaker. 7 places all center sound equally in the left/right speakers.

Setting the speaker setting

You need to make with/without (or yes/no) and size (bass reproducing capacity) selection/ad- justments depending on the installed speak- ers. The size needs to be set to LARGE (large) if the speaker is capable of reproducing sounds of about 100 Hz or below. Otherwise select SMALL (small).

!Low frequency range is not output if the subwoofer is set to OFF and the front and rear speakers set to SMALL or OFF.

!It is imperative that non-installed speakers be set to OFF.

!Set the front or rear speaker to LARGE if the speaker is capable of reproducing bass content, or if no subwoofer is installed.

1Touch NEXT on the DSP function menu.

2Touch SP SET.

3Touch aor bto select the speaker to be adjusted.

Each time you touch aor bselects the speak- er in the following order:

FRONT (front speakers)—CENTER (center speaker)—REAR (rear speakers)—

SUB WOOFER (subwoofer)—PHASE (subwoo- fer setting)

# You can switch to PHASE only when the sub- woofer has been set to ON.

62 En