Pioneer Sound & Vision MIxer operating instructions Basic Operations

BASIC OPERATIONS

BASIC OPERATIONS

POWER

VIDEO	VIDEO MASTER LEVEL
INPUT	VIDEO TRIM
AUDIO	AUDIO MASTER LEVEL
INPUT	AUDIO TRIM
	HI
HI, MID,	HI, MID,
LOW	LOW
Channel fader
lever
	BALANCE
CROSS FADER
ASSIGN	Cross fader lever
	(A/B)

English

1Set rear panel POWER switch to [ON].

2Set the AUDIO INPUT switch for the desired channel to match the type of connected component.

•When using the DVD input, set to [DVD].

•When using LINE input, set to [LINE].

•When using DVD/LINE input, set to [DVD/LINE].

•When using DIGITAL input, set to [DIGITAL].

•When using PHONO input, set to [PHONO].

3Use the VIDEO INPUT switch for the selected channel to choose the video input.

4Use the AUDIO TRIM dial to adjust the input level for each channel.

5Use the VIDEO TRIM dial to adjust the input level for each channel.

6Use the channel equalizer dials (HI, MID, LOW) to adjust the tone.

7Use the channel fader lever to adjust the sound volume of the selected channel.

8To use the cross fader on the selected channel, set the CROSS FADER ASSIGN switch to either cross fader channel A or channel B, and operate the cross fader lever (A/B).

•When not using the cross fader, set the CROSS FADER ASSIGN switch to [THRU].

9Use the AUDIO MASTER LEVEL dial to adjust the overall sound volume.

10Use the VIDEO MASTER LEVEL dial to adjust the overall luminance level.

11Use the BALANCE dial to adjust the sound balance between right and left.

13

En