Pioneer Sound & Vision MIxer Operating in the Video Solo Mode, Video MIX Effects Chart

USING THE VIDEO CONTROL FUNCTIONS

OPERATING IN THE VIDEO SOLO MODE

Setting video solo mode to ON allows instantaneous switching to the desired channel’s video.

By combining with the FADER AV SYNC button ON/OFF, a variety of operations is possible.

Whenever the power is first turned ON, the video solo mode is set to OFF by default.

When the video solo mode is ON, the VIDEO SOLO MODE button will flash.

When FADER AV SYNC is ON

•When the channel monitor is touched, output instantaneously switches to the video of the touched channel.

•When the channel fader begins rising from the [0] position, output instantaneously switches to that channel’s video.

When FADER AV SYNC is OFF

•When the channel monitor is touched, output instantaneously switches to the video of the touched channel.

Upon changing the FADER AV SYNC from ON to OFF, the original channel fader position will be maintained until the channel monitor is touched again.

Operation of the video cross fader and [TRANS] button are not supported in the video solo mode.

VIDEO MIX EFFECTS CHART

Video mix effects

Video cross fader

No	Name	Description of the effect
1	FADE	Switches video while mixing.
2	WIPE	Switches video while wiping away.
3	SWITCH	Switches instantaneously (without mixing).
4	CHROMA-B	Switches from the blue component of video on cross fader side [A] to the
		video on side [B].
5	CHROMA-G	Switches from the green component of video on cross fader side [A] to the
		video on side [B].
6	LUMINANCE	Switches from the dark portion of video on cross fader side [A] to the video
		on side [B].

16

En