Pioneer Sound & Vision MIxer operating instructions Contents

Installing the SVM-1000 in an EIA rack

The screw holes located on the left and right ends of the front panel (within the side cover) match the 19-inch EIA rack.

•Remove the 10 screws (five screws each located on the left and right sides of the unit) before installing the unit to the rack.

Screws

Side cover

•Holes for rack installation can be located when the side covers are removed.

•Attach the unit to the rack using screws of the appropriate size (screws not provided with the unit).

•When installing the unit in a rack, take care to avoid pinching your fingers.

Note

•Never place this unit directly above a power amplifier, as the heat given off by the amplifier might result in damage to the unit. Placing the unit directly above a power amplifier might also result in ham radio signals being picked up or in other types of interference.

•Allow at least 1U (43.7 mm) space between this component and the one mounted above it, so as to assure that the cords connected to this unit's input/output connectors and terminals do not touch the component above.

•Always be sure to remove the unit from its rack before shipping.

•When moving the unit while still installed in its rack, exercise caution to avoid subjecting the unit to shocks or vibration.

English

Contents
CONFIRM ACCESSORIES	4
CAUTIONS REGARDING HANDLING	4
Location	4
Cleaning the Unit	4
Disclaimer	4
About Copyright	4
FEATURES	4
NAMES AND FUNCTIONS OF PARTS	6
CONNECTION PANEL	6
OPERATION PANEL	7
CONNECTIONS	10
CONNECTING INPUTS	10
CONNECTING OUTPUTS	11
CONNECTING MICROPHONE AND HEADPHONES	12
CONNECTING THE POWER CORD	12
BASIC OPERATIONS	13
FADER CURVE SELECTION	14
USING THE VIDEO CONTROL FUNCTIONS	15
OPERATING THE VIDEO CROSS FADER	15
OPERATING THE VIDEO CHANNEL SWITCH	15
OPERATING IN THE VIDEO SOLO MODE	16
VIDEO MIX EFFECTS CHART	16
USING THE EFFECT FUNCTION	17
USING BEAT EFFECTS	17
USING TOUCH EFFECTS	19
USING TEXT EFFECTS	20
EDITING TEXT	22
DISPLAYING/HIDING THE MASTER MONITOR	22
EFFECT LIST	23

USING THE JPEG VIEWER	31
BEFORE USING THE JPEG VIEWER	31
JPEG VIEWER SETUP	31
THE VIDEO EQUALIZER FUNCTION	34
SET UP THE VIDEO EQ	34
TURNING THE EQUALIZER ON/OFF	34
FADER START FUNCTION	35
CROSS FADER START PLAY AND BACK CUE PLAY	35
PERFORM UTILITY SETUP	36
MIDI SETTINGS	36
SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL
SEQUENCER, OR USING SVM-1000 INFORMATION TO
OPERATE AN EXTERNAL SEQUENCER	36
MIDI CODE LIST	37
PERFORM VIDEO MONITOR SETUP	41
KEYBOARD LANGUAGE SETUP	41
HARDWARE SETUP	42
MIC SETTING	42
SYSTEM SETTINGS	42
MASTER OUT SETTINGS	43
LCD SETTINGS	43
MONITOR OUT SETTINGS	43
TOUCH PANEL SETTINGS	44
RETURNING TO DEFAULT SETTINGS	44
ENDING HARDWARE SET UP	44
TROUBLESHOOTING	45
ABOUT THE LCD SCREEN	46
ABOUT MINIATURE FLUORESCENT TUBE TECHNOLOGY	46
SPECIFICATIONS	47

3

En