Pioneer Sound & Vision MIxer Master level indicator Master L, R, Master balance dial Balance

NAMES AND FUNCTIONS OF PARTS

the signal passed through the cross fader; and the signals from microphone 1 and microphone 2.

35 Master level indicator (MASTER L, R)

These segment indicators display the audio output level from L and R channels. The indicators have a two-second peak hold.

36 Master balance dial (BALANCE)

Use to adjust the L/R channel balance for audio master output, booth monitor output, recording output, and digital output.

37 BOOTH MONITOR level control dial

This dial is used to adjust the booth monitor output volume. The volume can be adjusted independently of the master output level. (Adjustable range: –∞to 0 dB)

38 Channel fader curve switch (CH FADER CURVE)

This switch allows the user to select from three types of channel fader curve response.

The sound volume and video level changes as follows: This setting is applied equally to channels 1 to 4.

•At the left setting, the curve operates to produce a rapid rise as the channel fader approaches its distant position.

•At the right setting, the curve operates to produce an even, neutral rise throughout the channel fader’s movement.

•At the middle setting, an intermediate curve is produced, midway between the two curves noted above.

39SD CARD slot Insert an SD card.

40UTILITY button (MASTER MONITOR, SET UP)

Switches between display / no display of the master monitor on the LCD. When the master monitor is set to display, the indicator lights. When the button is held depressed, the indicator changes to flashing, and the LCD screen changes to show the utility setup menu.

41 VIDEO EQ button (ON/OFF, SET UP)

Switches the video equalizer ON/OFF. The indicator lights when the video equalizer is ON. When the button is held depressed, the indicator flashes, and the LCD display changes to show the equalizer setup menu.

42 JPEG VIEWER button

Use to set the JPEG viewer mode. The indicator lights when in the JPEG viewer mode.

43 VIDEO SOLO MODE button

Use to switch the video solo mode ON/OFF. When the video solo mode is ON, the indicator will flash.

44 Fader AV synchro button (FADER AV SYNC)

This button determines whether sound and video are controlled together, or independently. When set to ON, the indicator lights, and the channel fader and cross fader operations change both sound and video simultaneously. When set to OFF, the channel fader and cross fader levers control sound only, while video is controlled by the touch panel.

45 Effect channel selector dial (CH SELECT)

Use to select the channel to which effects are applied. When [MIC] is selected, effects are applied to both microphone 1 and microphone 2.

46 VIDEO FX PATTERN/TEXT BANK dial

Use to select video effects, video effect patterns and text banks.

47Effect parameter 1 dial (TIME/PARAMETER) Adjusts parameter for selected effect.

•If this dial is rotated while depressing the TAP button, direct BPM can be set manually.

48Effect parameter 2 dial (LEVEL/DEPTH) Adjusts quantitative parameters for selected effect.

49TAP button

The BPM is calculated from the intervals at which the TAP button is struck.

50Effect button/indicator (EFFECT ON/OFF) Turns selected effect ON/OFF.

When power is turned ON, the button lights (defaults to effect OFF). When effects are enabled (ON), the button flashes.

51 Cross fader lever (A/B)

This adjusts sound and video levels assigned to sides [A] and [B] in accordance with the CROSS FADER ASSIGN switches. When FADER AV SYNC is OFF, the control adjusts the sound only.

English

9

En