Pioneer Sound & Vision MIxer operating instructions Using Text Effects, Text Bank, Text Edit

USING THE EFFECT FUNCTION

2Use the effect select buttons to choose a desired image.

3Touch the image to apply changes.

4Use the CH SELECT dial to select the desired channel.

•In the event no input image is present, the visualizer’s image can be used.

USING TEXT EFFECTS

TEXT effects can be instantaneously set in-sync with the BPM (Beat Per Minute) of the track, enabling you to apply various TEXT effects to the rhythm.

When master monitor is off

1

2	3
6	4
5	3

7

8

9

When master monitor is on

	1		3
	2
				6
	4
		5		7
				8
				9
1	Effect select	Select and touch the desired effect button
	buttons	from the 6 TEXT effects.
2	[TEXT BANK]	Touch the text button of your choice from
	buttons	the 6 texts.
3	TEXT BANK	Rotate the VIDEO FX PATTERN/TEXT
	display	BANK dial to select a TEXT BANK from
		the 10 available.
4	Effect mode	A: Touch to apply the effect to audio only.
	select button	AV: Touch to apply the effect to both
		audio and video.
		V: Touch to apply the effect to video only.

5	Video EFFECT	Monitors the TEXT effects.
	monitor
6	[TEXT EDIT]	Touch to edit the text of the selected
	button	[TEXT BANK] button.
7	[BPM	Touch to switch the measurement
	AUTO/TAP]	method of the BPM between AUTO and
	button	TAP. Pressing the TAP button will also
		switch this to TAP.
8	Parameter	Displays the measured BPM and effect
	display	parameters.
9	Beat	Touch to select the multiplication factor
	button/beat	of the beat calculated from the BPM for
	display	synchronization of effects.

1Touch the [BPM AUTO/TAP] button to select the BPM (=Beat Per Minute) measurement mode.

AUTO: The BPM is automatically measured from the input music signal.

TAP: Tap the TAP button with your finger to manually input the BPM.

•Whenever power is first turned ON, [AUTO] is selected by default.

•The selected mode ([AUTO]/[TAP]) will appear in the display.

•When a BPM cannot be measured automatically, the BPM display in the display will flash.

•The measurement range of AUTO mode is BPM=70 to 180.

Depending on the track, the BPM may not be accurately measured. In these cases, use TAP mode to manually input the BPM.

2Touch the effect category button [TEXT].

•The [TEXT] button will light brightly, and the icon will move as an animation.

•The TEXT effect screen will be displayed.

3Select a text effect using the effect select buttons.

•The selected button will appear white, and the icon will move as an animation.

•For a description of each effect, refer to P. 30.

4Choose a text from TEXT BANK.

•Rotate the VIDEO FX PATTERN/TEXT BANK dial to select TEXT BANK and touch the [TEXT BANK] button to select the text.

•The selected button will appear white.

5Use the CH SELECT dial to select the channel to which you wish to apply the effect.

•The selected effect channel display will be highlighted.

•TEXT effects are not supported when [MIC] is selected. Effects are applied to audio only.

6Touch the effect mode select buttons to choose the effect mode.

•The selected button will be highlighted and an animation will appear.

A: An effect will be applied to the audio only.

AV: An effect will be applied to both the audio and video.

V: An effect will be applied to the video only.

• When turning the power ON, [AV] will be selected.

20

En