Address Book
Polycom®, Inc. 217
4Usually, additional definitions are not required and you can use the system defaults for the
remaining parameters. In such a case, click OK.
To modify the default settings for advanced parameters, click the Advanced tab.
5Define the following Advanced parameters:
New Participant - Advanced
Field Description
Video Bit Rate / Auto
(IP Only)
The Auto check box is automatically selected to use the Line Rate defined for
the conference.
Note: This check box cannot be cleared when defining a new participant during
an ongoing conference.
To specify the video rate for the endpoint, clear this check box, and then select
the required video rate.
Video Protocol Select the video compression standard that will be forced by the MCU on the
endpoint when connecting to the conference: H.261, H.263, H.264 or RTV.
Select Auto to let the MCU select the video protocol according to the endpoint’s
capabilities.
Resolution The Auto check box is automatically selected to use the Resolution defined for
the conference.
To specify the Resolution for the participant, select the required resolution from
the drop-down menu.