Polycom Version 8.4 Connecting to the Management Network

Appendix G - Configuring Direct Connections to the Collaboration Server
Polycom®, Inc. 701
6Click the OK button.
Connecting to the Management Network
To connect directly to the Collaboration Server:
1Connect one LAN cable between the PC and LAN 1 on the Collaboration Server’s back
panel.Connect the power cable and power the Collaboration Server On.
2Start the Collaboration Server Web Client application on the workstation, by entering the factory
setting Management IP address in the browser’s address line and pressing Enter.
3In the Collaboration Server Web Client Login screen, enter the default Username (POLYCOM) and
Password (POLYCOM) and click the Login button.
The Fast Configuration Wizard starts.
If no USB memory stick is detected and either: this is the First Time Power-up or the Default IP
Service has been deleted and the Collaboration Server has been reset, the following dialog box is
displayed:
For more information about First-time Power-up and the Fast Configuration Wizard see the
Polycom® RealPresence Collaboration Server 800s / Virtual Edition Getting Started Guide,
Procedure 1: First-time Power-up.
4Enter the following parameters using the information supplied by your network administrator:
Control Unit IP Address
Shelf Management Default Gateway 192.168.1.1 169.254.192.1
Network Entity
IP Address
Management
Network
(Factory Default) Alternate Network