Preparing a Document

You can use the document glass or the Automatic Document Feeder (ADF) to load an original document for copying, scanning, and sending a fax. Using the ADF, you can load up to 50 documents (47 ~ 105 g/m2, 12.5 ~ 28 lb) for one job. You can, of course, place only one sheet at a time on the document glass.

When you use the ADF:

•Do not load documents smaller than 142 x 127 mm or larger than 216 x 356 mm.

•Do not attempt to feed the following types of documents:

-carbon-paper or carbon-backed paper

-coated paper

- onion skin or thin paper

5

 

- wrinkled or creased paper

 

- curled or rolled paper

 

- torn paper

 

• Remove all staples and paper clips before loading

 

documents.

 

• Make sure any glue, ink, or correction fluid on the paper is

 

completely dry before loading documents.

 

• Do not load documents that include different sizes or

 

weights of paper.

 

• Do not load booklet, pamphlet, transparencies, or

 

documents having other unusual characteristics.

 

COPYING 5.3