A
Auto Fit Copying
This special copy feature can be applied only when you place a document on the document glass. If a document is detected in the ADF, Auto Fit copying does not work.
1Place the document to be copied on the document glass, and close the cover.
2Press Special Copy.
3Press Special Copy or the scroll button (
or 
) until “Auto Fit” appears on the bottom line.
4Press Enter to make your selection.
5If necessary, customize the copy settings, including number
of copies, darkness, and original type, by using the control
panel buttons. See “Setting Copy Options” on page 5.7. | 5 |
|
NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button while Auto Fit copying is enabled.
6Press Start to begin copying.
2 Sides on 1 Page Copying
You can copy a
When you copy using this feature, the machine prints one side of the document on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a
If the original document is larger than the printable area, some portions may not be printed.
This special copy feature can be applied only when you place a document on the document glass. If a document is detected in the ADF, 2 Sides on 1 Page copying feature does not work.
1Place the document to be copied on the document glass and close the cover.
2Press Special Copy.
COPYING 5.11