3Squeeze the width guide and adjust it to the width of the print material without bending it.
3
4If you want the machine to stack the printed pages on the rear output slot, open the rear door to use the rear output slot.
NOTE: Make sure to open the rear output slot when you print on transparencies. If not, they may tear while exiting the machine.
5After printing, fold away the paper support extension and close the Multipurpose tray.
Tips on Using the Multipurpose Tray
•Load only one size of print material at a time in the Multipurpose tray.
•To prevent paper jams, do not add paper when there is still paper in the Multipurpose tray. This also applies to other types of print materials.
•Print materials should be loaded face up with the top edge going into the Multipurpose tray first and be placed in the center of the tray.
•Always load only the print materials specified in the Specifications on page C.6 to avoid paper jams and print quality problems.
•Flatten any curl on postcards, envelopes, and labels before loading them into the Multipurpose tray.
•When you print on 76 mm x 127 mm (3 x 5 in.) sized media on the Multipurpose tray, open the rear door to use the rear output slot.
•Make sure to open the rear door when you print on transparencies. If not, they may tear while exiting the machine.
PAPER HANDLING 3.9