Solving Network Printing Problems

General Problems

Condition

Suggested solutions

 

 

System does not function

Possibly the parameters in the network card are

with some wrong values

corrupted. Restart the system and set to factory

entered by mistake while

defaults. See “Restoring the Network Configuration” on

configuring.

page A.8.

 

 

Not able to access from

Try pinging from the same system on which SNMP

SNMP Manager.

manager is running. If it does not succeed, there must

 

be a problem with network connectivity between the

 

manager and the machine. If ping succeeds, verify that

 

community names with sufficient permissions have been

 

used.

 

 

You cannot see any of

You should set IP address, Subnet Mask and Default

DHCP server, BOOTP

Gateway to the machine using Set IP.

server or RARP server,

 

when you want to set IP

 

address to the machine.

 

 

 

You can not print using

1.Check whether TCP/IP protocol is installed in your PC.

TCP/IP protocol.

2.Check whether your PC is on the same network with

 

the machine.

 

 

The name of printer is

Assign IP Address by using the Set IP.

displayed empty while

 

adding a port and the

 

printer doesn’t function.

 

 

 

9.28TROUBLESHOOTING