NOTE: The Another No. prompt does not appear if you have added numbers for another broadcast or delay fax job. You must wait until the job is completed.
7To enter more fax numbers, press 1 to select “Yes” and repeat steps 5 and 6. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another fax number.
8When you finish entering fax numbers, press 2 to select “No” at the Another No. prompt.
The display asks you to enter a name.
9To assign a name to the transmission, enter the name you want. For details about entering characters, see page 2.18.
If you do not want to assign a name, skip this step.
10Press Enter. The display shows the current time and asks you to enter the starting time when the fax is to be sent.
11Enter the time using the number keypad.
To select “AM” or “PM” for 
or
button or any number button.
If you set a time earlier than the current time, the document will be sent at that time on the following day.
12Press Enter when the starting time displays correctly.
13The document is scanned into memory before transmission. The display shows memory capacity and the number of pages being stored in memory.
For a document placed on the document glass, the display asks if you want to load another page. Select “1.Yes” to add. Otherwise, select “2.No.”
14The machine returns to Standby mode. The display reminds you that you are in Standby mode and that a delayed fax is set.
NOTE: If you want to cancel the delayed transmission, see “Canceling a Scheduled Fax” on page 7.33.
7.30FAXING