Power Save Mode
Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state.
1Press Menu until “Machine Setup” appears on top line of the display.
2Press the scroll button (
or 
) until “Power Save” appears on the bottom line. Press Enter.
3Press the scroll button (
or 
) to display “On” on the bottom line and press Enter.
Selecting “Off” means that the power save mode is deactivated.
4Press the scroll button (
or 
) until the time setting you want appears.
The available options are 5, 10, 15, 30, and 45 (minutes).
5Press Enter to save the selection.
6To return to Standby mode, press Clear/Stop.
Scan Lamp Save Mode
Scan Lamp Save mode allows you to save the scan lamp. The scan lamp under the document glass automatically turns off when it is not in actual use to reduce power consumption and extend the life of the lamp. The lamp automatically wakes up after some
You can set the length of time for which the scan lamp waits after a scan job is completed before it switches to the power save mode.
1Press Menu until “Machine Setup” appears on top line of the display.
2Press the scroll button (
or 
) until “Scan PWR Save” appears on the bottom line. Press Enter.
2.24GETTING STARTED