
3Remove the jammed paper by gently pulling it straight out.
If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in this area, check the fuser area around the toner cartridge. See page 9.7.
4Insert the paper tray into the machine until it snaps into place.
5Open and close the front door to resume printing.
In Optional Tray 2
1Pull the optional Tray 2 open.
2Remove the jammed paper from the machine.
If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in this area, go to step 3.
3Pull the standard Tray 1 open.
9.6TROUBLESHOOTING