The copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the corresponding buttons on the control panel.
To create your own default settings:
1Press Menu on the control panel until “Copy Setup” appears on the top line of the display.
The first menu item,
2Press Enter to access the menu item. The first setup option, “Darkness,” appears on the bottom line.
3Press the scroll button (
or 
) to scroll through the setup options.
4When the option you want to set appears, press Enter to access the option.
5Change the setting using the scroll button (
or 
). You can enter the value using the number keypad.
6Press Enter to save the selection.
7Repeat steps 3 through 6, as needed.
8To return to Standby mode, press Clear/Stop.
NOTE: While you are setting copy options, pressing Clear/Stop cancels the changed settings and restores their default status.
5.14COPYING