An IP address consists of 4 bytes.
Enter a number between 0 and 255 for each byte.
A
7Press the scroll button (
or 
) to enter a number between 0 and 255 and press Enter or Upper Level to move between bytes. Enter a number using the number keypad and use the scroll button (
or 
) to move between bytes.
8Repeat step 7 to complete the address from the 1st byte to the 4th byte.
9Press Enter.
10To select other parameters, such as a Subnet Mask or a
Gateway, press the scroll button (
or 
) until the desired item displays on the bottom line. Press Enter.
11Repeat steps 7 through 9 to configure the other TCP/IP parameters.
12Press Clear/Stop to return to Standby mode.
Dynamic Addressing (BOOTP/DHCP)
To have the TCP/IP address assigned automatically by the server, take the following steps:
1Press Menu until you see “Network Setup” on the top line of the display.
2Press the scroll button (
or 
) until “Config Network” appears on the bottom line.
3Press Enter.
The first available menu item, “TCP/IP,” appears on the bottom line.
4Press the scroll button (
or 
) to display “DHCP” on the bottom line and press Enter.
5To assign the address from the BOOTP server, press Enter when “BOOTP” displays on the bottom line.
USING YOUR MACHINE ON A NETWORK A.7