Color JPEG-200: If you select this option, 200 dpi resolution and JPEG file type will be automatically selected.

Resolution: Select resolutions of 100 dpi, 200 dpi or 300 dpi.

NOTE: When you edit an image which has been scanned in

100 dpi resolution, the image may differ from the original image, depending on the program you use.

7Press the scroll buttons ( or ) until “Start Scanning” displays and press Enter.

If you press Enter when the display shows “Logout”, your machine returns to the Standby mode.

8The document will be scanned to the computer where the Network Scan program is running.

If you have chosen TIFF or PDF as the file type, the display asks if you want to scan another document. If you need to scan more than one document, select “Yes” using the scroll

button ( or ) and press Enter. The next document is

6

scanned and stored. Repeat this until all documents have

been scanned then select “No”.

Setting Network Scan Timeout

If Network Scan on your computer does not send a refresh request and does not scan a job within the timeout period configured in Network Scan, the entry your machine returns to the Standby mode.

To set the Network Scan timeout option:

1Press Menu until “Machine Setup” appears on the top line of the display.

2Press the scroll buttons until “Scan Timeout” appears on the bottom line and then press Enter.

3Enter the desired timeout value and press Enter.

The default value is 30 minutes. Users can enter any value from 1 minute to 1,440 minutes.

4The change will be broadcast over the network and effective to all clients connected to the network.

SCANNING 6.11