4Place the machine over the tray, aligning the feet on the machine with the positioners on the tray.
Lifting handles are located at the 
lower edge of both sides of the machine.
5Plug the interface cable of the tray into the connector on the back of the machine.
6Load paper in the tray. The instructions for loading paper in this tray are the same as for loading the standard paper tray. See page 2.7.
7After loading paper, you need to set the paper type and size for Tray 2. See page 2.21.
8Reconnect the power cord and cables and then turn the machine on.
B.6 INSTALLING MACHINE OPTIONS