Automatic Dialing

One-touch Dialing

The 20 one-touch buttons on the control panel lets you store frequently-used fax numbers and dial a number automatically with the touch of a button.

Using the Shift button, you can store up to 40 fax numbers on the one-touch buttons.

Storing a Number for One-touch Dialing

1Press and hold one of the one-touch dial buttons for about 2 seconds.

If you want to use one-touch dial buttons from 21 to 40, press Shift and hold down the one-touch dial button for about 2 seconds.

The display asks you to enter the fax number. “T” signifies

7

that you are assigning a one-touch dial button.

 

If a number is already stored in the location you chose, the display shows the number to allow you to change it. To start over with another one-touch button, press Clear/Stop.

2Enter the number you want to store using the number keypad and press Enter.

To insert a pause between numbers, press Redial/Pause. The symbol “-” appears on the display.

If you make a mistake while entering a number, press the button and re-enter the correct number.

3To assign a name to the number, enter the name you want. For details about entering characters, see page 2.18.

If you do not want to assign a name, skip this step.

4Press Enter when the name appears correctly or without entering a name.

FAXING 7.19