Selecting the Paper Tray

After loading the print material for fax output, you have to select the paper tray you will use for the fax job.

1Press Menu on the control panel.

The first available menu, item “Paper Setting,” appears on the top line of the display.

2Press the scroll button ( or ) until “Fax Tray” appears on the bottom line of the display.

3Press Enter.

4Press the scroll button ( or ) until the paper tray you want appears on the display.

You can select Tray1, Tray2, Tray1/2, or Auto. If you do not install the optional Tray 2, the Tray2 and Tray1/2 menu item will not appear on the display.

5Press Enter to save the selection.

6To return to Standby mode, press Clear/Stop.

7

Adjusting the Document Resolution

The default document settings produce good results when using typical text-based documents.

However, if you send documents that are of a poor quality, or contain photographs, you can adjust the resolution to produce a higher quality fax.

1Press Resolution on the control panel.

2By pressing Resolution or the scroll button ( or ), you can choose from Standard, Fine, Super Fine, Photo Fax, and Color Fax.

3When the mode you want to use displays, press Enter to make your selection.

FAXING 7.9